Journal

• A Salimianrizi, E Foroozmehr, M Badrossamay, H Farrokhpour; Effect of Laser Shock Peening on surface properties and residual stress of Al6061-T6 , Optics and Lasers in Engineering, Vol.77:112-117, 2016.

• S Naghieh, MR Karamooz Ravari, M Badrossamay, E Foroozmehr, M Kadkhodaei; Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: The effect of layer penetration and post-heating , Journal of the mechanical behavior of biomedical materials, Vol.59:241-250, 2016.

• B. Goodarzy, E. Foroozmehr, H. Alemohammad; Numerical study of on-fiber metal film geometry on behavior of dual parameter SFBG sensors, Smart Materials and Structures, Vol.25,Issue2:025023, 2016.

• A. Foroozmehr, M. Badrossamay, E. Foroozmehr; Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed , Materials & Design, Vol.89:255-263, 2016.

• M. Kaveh, M. Badrossamay, E. Foroozmehr, A. Hemasian Etefagh; Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes, Journal of Materials Processing Technology, Vol.226:280-286, 2015.

• Salimian, E. Foroozmehr, M. Badrossamay; Laser Shock Peening of Al 6061-T6 Alloy, a theoretical and experimental study, Modares Mechanical Engineering, Vol.15,Issue7, 2015.

• H. Montazerolghaem, A. Fadaie Tehrani, M. Badrossamay; An innovative approach for manufacturing of thin welded blanks and coils, Materials and Manufacturing Processes, Vol.29,Issue8:889-893,2014.

• M.R. Karamooz Ravari, M. Kadkhodaei, M. Badrossamay, R. Rezaei; Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling,International Journal of Mechanical Sciences,Vol.88:154-161, 2014.

• H. R. Alemohammad, E. Foroozmehr, B. S Cotten, E. Toyserkani; A dual-parameter optical fiber sensor for concurrent strain and temperature measurement: design, fabrication, packaging, and calibration, Journal of Lightwave Technology,Vol.31,Issue.8:1198-1204, 2013.

• T. Baldridge, G. Poling, E. Foroozmehr, R. Kovacevic, T. Metz, V. Kadekar, M.C. Gupta; Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications, Optics and Lasers in Engineering,Vol.51,Issue.2:180-184, 2013.

• R. Rezaie, M. Badrossamay, A. Ghaie, H. Moosavi; Topology optimization for fused deposition modeling process, Procedia CIRP,Vol.6:521-526, 2013.

• E. Foroozmehr, S. Esmaeili, D. J. Lloyd, M. Gallerneault; Modeling of solutionizing and solute redistribution in a co-cast bi-layer al alloy system, Metallurgical and Materials TransactionsA, Vol.43,Issue.6:1770-1780, 2012.

• E. Foroozmehr, H. Alemohammad, X. Wang, E. Toyserkani, S. Esmaeili; Laser-assisted surface patterning of magnesium with silver nanoparticles: synthesis, characterization and modelling, Journal of Physics D: Applied Physics, Vol.44,Issue.49:495305, 2011.

• S. Esmaeili, E. Foroozmehr, L. Liao, S.Huberman, D. Lloyd, M. Gallerneault; A Study on Solute Redistribution during Solution Treatment and Aging Bahavior in a Bi-Layer AA 6 xxx-AA 3 xxx Alloy System, Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Feb, 2011.

• K. Kempen, L. Thijs, E. Yasa, M. Badrossamay, W. Verheecke, JP. Kruth; Process optimization and microstructural analysis for selective laser melting of AlSi10Mg,Solid Freeform Fabrication Symposium, Vol.22:484-495, 2011.

Conference

• H.R. Alemohammad, E. Foroozmehr, B.Cotten, E. Toyserkani; Direct-Write Microfabrication for Enhancement of Functionality of Optical Fiber Devices, Nanotechnology 2012: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational, Vol.2:200-202, 2012.

Book

• Ehsan Foroozmehr, Hamidreza Alemohammad, Ehsan Toyserkani; Dual-parameter optical fiber sensors for structural health monitoring, 2011 7th International Workshop on Fibre and Optical Passive Components, 2011.